{{ctrl.val.LargeViewImgSrcAlt}}
  • {{ctrl.val.GoodsItem.ThumbnailImageAlt}}
  • {{ctrl.val.GoodsItem.InfoImage1Alt}}
  • {{ctrl.val.GoodsItem.InfoImage2Alt}}
  • {{ctrl.val.GoodsItem.InfoImage3Alt}}

{{ctrl.val.GoodsItem.JPName}}

{{ctrl.val.priceInfo.PriceInfo.TotalGoodsPriceOrigin | tqCurrency}} ({{L.TaxInclude}}) ({{L.quantity}} {{ctrl.val.priceInfo.Unit}}) {{(ctrl.val.priceInfo.PriceInfo.TotalGoodsPriceOrigin - ctrl.val.priceInfo.PriceInfo.TotalGoodsPrice) / ctrl.val.priceInfo.PriceInfo.TotalGoodsPriceOrigin * 100 | tqFloor}}% - {{ctrl.val.priceInfo.DiscountItem.Amount | tqCurrency}}
{{ctrl.val.priceInfo.PriceInfo.TotalGoodsPrice | tqCurrency}} ({{L.TaxInclude}}) ({{L.quantity}} {{ctrl.val.priceInfo.Unit}})
{{ctrl.val.CalcedPricePerUnit}}
{{L.CouponPrice}} {{ctrl.val.priceInfo.PriceInfo.LowestPrice | tqCurrency}} ({{L.quantity}} {{ctrl.val.priceInfo.Unit}})

{{L.SavingPoint["구매시 적립금 _% 적립예정"] | tqformat : ctrl.val.OrderSavingRate }}

star {{ctrl.val.WishData.WishCount}}

● Single type sticker

● Art 90g

● 50x50mm

● Normal Adhesion

Gloss coated

● Square-cut

● 4 Working days

● Full colour on Front

● Quantity 100

● $5

{{L.AtypeDiscountTable_th_Count}} {{L.AtypeDiscountTable_th_DiscountedSellUnitPrice}} {{L.AtypeDiscountTable_th_DiscountedSellPrice}}
{{userView.Count | number}}
{{userView.DiscountedSellUnitPrice | tqCurrency}}
{{userView.DiscountedSellPrice | tqCurrency}}
{{minMaxOrderUnit.join('  |  ')}}
{{ctrl.stockOverMsg()}}
  • {{ctrl.getOptionText(item)}}
  • {{item.val}}{{(item.price > 0 && ctrl.isEtype()) ? '(' + (item.price | tqCurrency) + ')' : ''}}
  • {{ctrl.val.desc.color}}
  • {{ctrl.val.desc.unit}}
  • {{ctrl.val.info.PriceInfo.TotalGoodsPrice | tqCurrency}}

Ordering Tips

You may order sizes according to your needs. Please specify them on the ordering page.
Make sure to review the design checklist before creating artwork to avoid any issues in printing and production.

Cautions for Sticker Use

· Our stickers use standard adhesives. As such, they are not suitable for situations or environments requiring strong adhesion.
· Avoid using or leaving stickers in environments with direct sunlight or high temperatures. Sunlight or heat may cause discoloration or a weakening of the adhesive.
· Apply stickers to smooth, flat surfaces. Thicker sticker materials are not suitable for curved, uneven surfaces and may not stick properly.
· Any dirt or moisture on a target surface can reduce adhesive strength. Ensure to wipe and dry the surface before applying the sticker.
· The adhesive strength and longevity of prints (color, clarity, etc.) can vary depending on operating conditions and environments.

Copyright

We do NOT accept any order with images or designs that may infringe on any legal rights, including copyrights, portrait rights, trademark rights.
Please be sure to inspect the designs yourself, as it can be difficult for us to thoroughly check each design for possible copyright infringement.
We shall not be responsible for any consequences if an image submitted to us for production is against any of the above rights.

1. Square Cut

[Back Liner]

A cut line is included on the back liner of square cut stickers so they can be peeled off easily.
Standard stickers will have one cut line each. Depending on the sticker size 2-3 more cut lines may be added.

(1) Cut lines are not applied to Silver PET 25μ μ and TransparentPET 38 μ stickers.
(2) Cut lines will not be applied to orders with full color on the front and black on the back.
(3) Cut lines are not applied to Outdoor (Waterproof) Square Cut stickers.

Customers are generally not able to select the number or direction of back liner cut lines. Adjustments and exceptions may be made for large orders.

2. Kiss Cut

① Regular

Regular shapes include rounded squares or triangles, circles, and ovals.
The standard rounded edges are 1mm for triangles and 3mm for squares, but they can be adjusted according to your needs.
Request changes to the rounded edges through the Artwork or Order Memo.

② Custom Shape

We also offer custom kiss cut shapes.
We are able to produce most shapes, but complicated shapes with too many edges may not be possible.
We will inform you in advance if we are unable to produce your requested shape.

③ Double Kiss Cut

Available on sticker sheets only.
Insert regular and custom shapes into the artwork when you place an order.

Download template

Templates are compatible with Adobe Illustrator versions 10 to CC.
Unzip the file before use.
Each template is provided in one standard size.
You may adjust the size in 1mm increments to suit your needs while designing.


Uploading Your Design
Accepted File Formats: ai, pdf, psd, jpg, png, zip, sit, 7z, rar, rah
File Size: Up to 2GB

Note: You can only upload one file at a time. When uploading multiple files, please compress them into one folder before uploading.
We cannot produce designs made in Microsoft Office.

Please select the product below

 

RefundPolicy

ADsticker strives to produce the highest quality stickers to meet our customer's needs.
However, sometimes under varying circumstances there may be misprints, errors, or other defects in the final product.
If customers find defects in our company’s products we guarantee to re-print the order according to the customer's request or offer a refund on the order.

Please contact ADsticker about any defects within 7 days of receiving your order. Refer to the “Procedure for Refunds / Reprints due to Product Defects” at the end of this page.

 

A Colors

#

All artwork must be submitted in CMYK color mode.
ADsticker cannot guarantee a perfect color match between separate orders of the same artwork.
(The colors of the first order and a reprint may not match 100%.)
We do not bear any responsibilities for differences in color in our products.
Depending on the material, black may be printed in gray. This does not qualify for reason of refund.
To achieve a perfect black, please set the color mode to C30% M30% Y30% K100%.

 

B Bleed

#

[Square cut]
Artwork should have a margin of 1mm on all sides.
Products smaller than 100*100mm or with defined borders cannot always be cut evenly, so keep this is mind when designing artwork.
Positioning errors related to this are not included in our refund policy.


bleed_img_1.png

bleed_img_2.pngbleed_img_3.png
 

[Kiss Cut] All artwork for kiss cut stickers must have a margin of 1mm. Small separation marks may be printed in the margins. These are not included in the refund policy.

 

C [Die Cut]

#

ADsticker uses a metal template to cut our stickers, not laser cutting. As such, there may be up to a 1mm difference in size or positioning of the cut.
The cutting process may generate a slight distortion on the sides of the stickers as shown below. This is not included in our refund policy.



bleed2_img_1.pngbleed2_img_2.png
 

D Back Liner for Square Stickers

#

This only applies to square sticker products.
All products will include one or more cut lines in the back liner of the product. Please contact our customer service center for any special requests about the back liners for your order.

Creating the back liner cut may cause minor scratches on the stickers. If you are concerned about possible scratches we recommend you choose kiss cut or die cut stickers or a different printing material.

 

※Kiss Cut and Die Cut do not include cut lines on the back liner.
※PET materials do not come with cut lines on the back liner.


Stickerback-liner.png
Material Back-Liner
Art paper, Simili paper More than one
Kraft paper, White PP
Transperent PET None
Silver PET
 

E Adhesive

#

The adhesives are applied to our products under strong pressure, and as such some may stick to the sides of the stickers.
Stickers are a combination of paper and adhesives.
Because paper is flexible the adhesive may cause it to bend over time.
If you would like to request a refund due to severe bending or curving of your order please make sure to contact our customer center within 7 days of delivery.

 
  • Adhesive_part_1.png
  • caution.pngAdhesion Strength

    There are various reason adhesive is not working
    properly.
    - not suitable place or surface to stick
    - not suitable form or material
    - not suitable environment (temperature or humidity)
    If you are not happy about adhesion strength,
    please claim us within 7 days.

  • Adhesive_part_2.png
  • Adhesive_part_3.png
 

[Procedure for Refunds / Reprints due to Product Defects]

#

You can request a reprint or refund for defective products by clicking through > Q&A.
Please share as many details with us as possible in your inquiry, including photos of the product and your requests, to help us identify the problem and speed up the process.

Current options for defective products are: ① Reprint, ② Return + Credit/Debit Card or Bank Transfer Refund, ③ Return + Refund in Points.

  • {{::item.PurposeName}}

    star{{getStartPoint(item.StarPoint)}}

    {{::ctrl.config.reviewStarPointDesc[item.StarPoint-1]}}

    {{::ctrl.config.reviewStarDetailPoint[0]}}

    star{{getStartPoint(item.StarDetailPointArr[0])}}

    {{::ctrl.config.reviewStarDetailPoint[1]}}

    star{{getStartPoint(item.StarDetailPointArr[1])}}

    {{::ctrl.config.reviewStarDetailPoint[2]}}

    star{{getStartPoint(item.StarDetailPointArr[2])}}

    [{{L.bodySizeInfo}}] {{::L.height}} {{::item.BodySize.tallsize == 139 ? L['139cm이하'] : (item.BodySize.tallsize == 175 ? L['175cm이상'] : item.BodySize.tallsize+'cm') }} {{L.top}} {{item.BodySize.topsize.toUpperCase()}} {{L.bottom}} {{item.BodySize.bottomsize.toUpperCase()}}

    {{item.WriteDate | tqDate}}

    {{!!item.DisplayName ? item.DisplayName : (item.UserId.substring(0, 7) | conversionStar : 4)}}

    {{item.UserId.substring(0, 7) | conversionStar : 4}}

    Seller {{item.ReplyContents}} {{item.ReplyDate | tqDate}}

  • {{::L['상품에 대한 문의를 남기는 게시판입니다.']}} {{::L['해당 게시판의 성격과 다른 글은 사전동의 없이 담당자에 의해 이동될 수 있습니다.']}}
  • {{::L['배송관련, 주문(취소/교환/환불)관련 문의 및 요청사항은']}} {{::L['마이페이지의']}} Q&A{{::L['에 남겨주시기 바랍니다.']}}
  • {{::item.OrderId}}
    {{item.IsReply ? L['답변완료'] : L['답변대기']}}
    {{::item.WriterNameSc}}
    {{::item.WriteDate | tqDate}}
    {{::L['검색된 내역이 없습니다.']}}